Office chairs are probably one of the most overlooked items under office furniture. They play a significant role in providing daily comfort by providing lumbar and neck support throughout the day. However, with time, our office chairs will begin to show signs of wear and tear. But, discarding your four-wheeled friend is not the only option. With a few tips and tricks, you can make your old chair seem a good one, thus making the best of your affordable office chair.
A wobbling chair is a cause of concern for many. Now, there are many reasons as to why your chair wobbles.
Major reasons include a faulty chair mechanism or a faulty chair base. Whatever the reason is, the first step is to identify the cause of wobbling. Start by turning the chair in a manner that it is horizontal. The position of the chair should be such that its castors and the base of the chair are completely off the floor. After doing so, wobble the seat from side to side slowly, putting pressure on the sides of the seat. In order to check whether the control mechanism would require replacement, check if the chair seems loose near where the pneumatic cylinder and control mechanism join together.
Sinking chair
A sinking chair is yet another common problem faced by people after prolonged usage of the chair. In a majority of cases, the reason is that the piston in the lever that controls the chair height has become worn down and needs replacing. Yet again, there isn’t much to worry about as a simple procedure when followed will solve the issue and help you make the best of your affordable chair.
All that you need to do is lift the seat to your chosen height manually. Now, lift the chair and its seat post out from the base/castors. Following this, lay the chair on the floor horizontally and remove decorative or non-functioning collars around the seat post, if any. That’s it! You are sorted.
Seat jerks
The reason for seat jerks might be that the pivot could have been worn away or you might have a loose tension spring. In such a case, you might just need to replace the pivot mechanism or adjust the tension spring knob and you are good to go.
Seat Sinks While Sitting
This is mostly due to a faulty gas cylinder. A quick solution to this could be removing or installing a new gas cylinder.
Piston Rod Is Hitting The Floor
Sometimes, it is seen that the piston rod hits the floor on a continuous basis. There cannot be anything annoying than this. However, the fix to this is quite simple. If the retainer clip is broken, simply remove, replace and install a new gas cylinder.
If you are want to buy office chairs and are looking for affordable office chairs that are reliable as well, wait no more and head straight to the leading office chairs dealers in Chennai. Since the chairs would be reliable, discarding them as a result of minute repairs isn’t advised.
Recent Comments